426
edits
Changes
Jump to navigation
Jump to search
Line 21:
Line 21:
no edit summary
*Leaving pavers uncompacted – finished surfaces must be compacted at the end of each workday.
*Leaving pavers uncompacted – finished surfaces must be compacted at the end of each workday.
*Cutting blocks in infiltration area – edge pavers should be cut with a wet saw in a designated area away from the infiltration area to avoid clogging with fines and dust.
*Cutting blocks in infiltration area – edge pavers should be cut with a wet saw in a designated area away from the infiltration area to avoid clogging with fines and dust.
<gallery mode="packed" widths=300px heights=300px>
Paver-placement-vehicle.JPG | Installing entire pallets of pavers is possible with specialized equipment.
Paver-placement-vehicle-2.JPG | The equipment shown can install single pallets of pavers all at once.
Paver-placement-crane.jpg | Joined permeable pavers being installed with a crane.
Paver-placement-cut.jpg | Pavers cut to the shape of the adjacent curb at IMAX Headquarters in Mississauga.
IMAX-paved.jpg | Finished parking lot at IMAX Headquarters in Mississauga.
Paver-cutting-incorrect.jpg | Cutting pavers within the infiltration area is not advised as the fines/dust could clog the permeable surface.
</gallery>
[[Category:Gallery]]