Difference between revisions of "Weirs"
Jump to navigation
Jump to search
Jenny Hill (talk | contribs) m |
Jenny Hill (talk | contribs) m |
||
| Line 5: | Line 5: | ||
<math>Q=\frac{2}{3}C_{d}\cdot L\sqrt{2g}\cdot H^{\frac{3}{2}}</math> | <math>Q=\frac{2}{3}C_{d}\cdot L\sqrt{2g}\cdot H^{\frac{3}{2}}</math> | ||
{{Plainlist|1=Where: | {{Plainlist|1=Where: | ||
*''C<sub>d</sub>''= discharge coefficient (default 0.62 for a 'sharp edge). | *''C<sub>d</sub>'' = discharge coefficient (default 0.62 for a 'sharp edge). | ||
*''L'' = Length of the weir (m) | *''L'' = Length of the weir (m) | ||
*''g'' = Acceleration due to gravity (9.81 m/s<sup>2</sup>) | *''g'' = Acceleration due to gravity (9.81 m/s<sup>2</sup>) | ||
*''H'' = Height of water over the weir (m)}} | *''H'' = Height of water over the weir (m)}} | ||
Revision as of 17:12, 3 July 2019
The most common form of weir in LID practices is a rectangular weir, in the form of a check dam or flow control in a swale or other open channel.
The flow (Q), may be calculated by measuring the height of water on the sill of the weir:
Where:
- Cd = discharge coefficient (default 0.62 for a 'sharp edge).
- L = Length of the weir (m)
- g = Acceleration due to gravity (9.81 m/s2)
- H = Height of water over the weir (m)