Difference between revisions of "Topsoil"

From LID SWM Planning and Design Guide
Jump to navigation Jump to search
m
Line 12: Line 12:
*60 % sand,  
*60 % sand,  
*25 % silt,  
*25 % silt,  
*10 % clay,  
*15 % clay,  
*organic matter 5 %,  and
*organic matter 5 %,  and
*pH value of 6 - 7.5.  
*pH value of 6 - 7.5.  


Topsoil must be capable of sustaining vigorous plant growth and to be free from subsoil, roots, vegetation, debris, toxic materials and stone over 50 mm diameter. Specify that topsoil sample must be provided to the consultant for testing and analysis including herbicide or atrazine content. All topsoil supplied must conform to a sample provided. Minimum topsoil depth is 150 mm for turf areas and ranging to 1.25 m for perennials, shrubs and trees.
Topsoil must be capable of sustaining vigorous plant growth and be free from toxic material and roots, stones or debris over 50 mm in diameter. Specify that samples of topsoil from each source to be drawn upon be provided to the consultant for visual inspection, along with topsoil quality test results from an accredited soil testing laboratory, or a quality assurance certificate from the supplier. We recommend restoring a minimum topsoil depth of 200 mm for planting turf areas, and 400 mm for planting perennials, shrubs and trees.


[[category: materials]]
[[category: materials]]

Revision as of 22:26, 9 April 2020

  • Topsoil may be material that was stripped from the project site and stored in stockpiles for re-use, or material imported to the site from a supplier provided the physical and chemical characteristics are within acceptable ranges.
  • Topsoil shall be in compliance with Ontario Regulation 153/04 Record of Site Condition standards for soil quality or as amended through Ontario Management of Excess Soil - A Guide for Best Management Practices.
  • Soil laboratory reports shall certify the material to be suitable for re-use on residential, parkland, institutional, industrial, commercial, or community landscapes for the germination of seeds and the support of vegetative growth.

The factors to consider in determining a suitable soil mix for a vegetated stormwater practice include the following:

Specify that topsoil must be friable, neither heavy clay nor of a very light sandy nature.

An example of sandy loam topsoil is

  • 60 % sand,
  • 25 % silt,
  • 15 % clay,
  • organic matter 5 %, and
  • pH value of 6 - 7.5.

Topsoil must be capable of sustaining vigorous plant growth and be free from toxic material and roots, stones or debris over 50 mm in diameter. Specify that samples of topsoil from each source to be drawn upon be provided to the consultant for visual inspection, along with topsoil quality test results from an accredited soil testing laboratory, or a quality assurance certificate from the supplier. We recommend restoring a minimum topsoil depth of 200 mm for planting turf areas, and 400 mm for planting perennials, shrubs and trees.