Changes

{{textbox|The 3 zones of IPZ are as follows:

{{textbox|The 3 zones of IPZ are as follows:

'''IPZ‐1''': This is the area closest to a municipality's intake pipe and is a set distance which extends one kilometre (Km) upstream and 120 metres onto the shore. IPZ-1 is the most vulnerable to contamination as it is the closest to the intake and allows limited time for dilution to occur to help reduce the concentration of a contaminant released within the zone, this lack of time also doesn't allow municipal water system operators much time to react to this released contamination that is headed towards the municipal intake.

# '''IPZ‐1''': This is the area closest to a municipality's intake pipe and is a set distance which extends one kilometre (Km) upstream and 120 metres onto the shore. IPZ-1 is the most vulnerable to contamination as it is the closest to the intake and allows limited time for dilution to occur to help reduce the concentration of a contaminant released within the zone, this lack of time also doesn't allow municipal water system operators much time to react to this released contamination that is headed towards the municipal intake.

'''IPZ‐2''':  This area is developed by utilizing both hydrodynamic modelling and a time-of-travel calculation within overland pathways (natural and human-made - i.e. rivers, creeks, swales, storm sewers, etc.) that ultimately lead to and discharge near the municipalities intake(s). Includes both the on and offshore areas where overland flowing water that may be polluted with a concentration of a given number of contaminants would be able to reach the municipal intake within approximately two (2) hours. The 2 hour mark is set as the minimum amount of time to allow municipal water system operators to address a potential contamination concern.

# '''IPZ‐2''':  This area is developed by utilizing both hydrodynamic modelling and a time-of-travel calculation within overland pathways (natural and human-made - i.e. rivers, creeks, swales, storm sewers, etc.) that ultimately lead to and discharge near the municipalities intake(s). Includes both the on and offshore areas where overland flowing water that may be polluted with a concentration of a given number of contaminants would be able to reach the municipal intake within approximately two (2) hours. The 2 hour mark is set as the minimum amount of time to allow municipal water system operators to address a potential contamination concern.

'''IPZ‐3''': This area lies outside of IPZ-1 and IPZ-2 and as such contaminants likely could only reach the intake pipe during and/or after a major rainfall/storm event. The size and shape of an IPZ-3 zone is based on associated lakes, streams and other humanmade conveyances that could contribute excess overland flow during an event.}}

# '''IPZ‐3''': This area lies outside of IPZ-1 and IPZ-2 and as such contaminants likely could only reach the intake pipe during and/or after a major rainfall/storm event. The size and shape of an IPZ-3 zone is based on associated lakes, streams and other humanmade conveyances that could contribute excess overland flow during an event.}}