Difference between revisions of "Inspection and Maintenance: Green Roofs"

From LID SWM Planning and Design Guide
Jump to navigation Jump to search
Line 240: Line 240:
*Check for damage or vegetation;
*Check for damage or vegetation;
*Remove any vegetation or natural debris annually to biannually.
*Remove any vegetation or natural debris annually to biannually.
|[[File:Pass perimeter green roof.PNG|300px|thumb|center|CDA has not changed in size or land cover. Sediment, trash or debris is not accumulating and point sources of contaminants are not visible.]]  
|[[File:Pass perimeter green roof.PNG|300px|thumb|center|The footprint area of the green roof matches what was specified in the final design.]]  
|[[File:Fail perimeter green roof.PNG|280px|thumb|center|Size of the CDA has changed from design assumptions (i.e. large asphalt area drains to a small portion of the permeable pavement). Evidence of surface ponding is visible.]]  
|[[File:Fail perimeter green roof.PNG|300px|thumb|center|The footprint area of the green roof is significantly smaller than what was specified in the final design.]]  
|-
|-
|'''[[Green roof media|Growing medium/filter bed]]'''
|'''[[Green roof media|Growing medium/filter bed]]'''
Line 250: Line 250:
*Replace erosion/scour protection where missing or uplifted;
*Replace erosion/scour protection where missing or uplifted;
*Remove trash and natural debris annually to biannually.
*Remove trash and natural debris annually to biannually.
|[[File:Pass Filter Bed green roof.PNG|280px|thumb|center|Although permeable pavers are generally considered [[pretreatment]] for other BMPs in a [[Low impact development treatment train tool|treatment train]] system, using eavestrough screens can act as pretreatment as they don't add to sediment build up and accumulation on the paver surface. (Photo Source: Guertin, 2010)<ref>Guertin, M. 2010. Simple Screen Gutter Guards Better Than Pro-Installed Systems (and way cheaper). Fine Homebuilding - The Daily Fix. Accessed July 17 2022. https://www.finehomebuilding.com/2010/08/17/simple-screen-gutter-guards-better-than-pro-installed-systems-and-way-cheaper</ref>]]  
|[[File:Pass Filter Bed green roof.PNG|340px|thumb|center|There is no standing water on the green roof surface shortly after a storm event.]]  
|[[File:Fail Filter Bed green roof.PNG|300px|thumb|center|Build up of leads, sediment and leaf detritus in an eavestrough downspout disconnection leading to a permeable pavement surface. If not cleaned regularly this can lead to clogged pores between the pavers reducing the infiltration rate where the downspout deposits water onto the feature. (Photo Source: My Gutter Pro, 2021)<ref>My Gutter Pro. 2021. Clogged Downspout : Causes and Solutions. 10 April 2021. Accessed July 19 2022. https://mygutterpro.com/downspout-clog/</ref>]]  
|[[File:Fail Filter Bed green roof.PNG|300px|thumb|center|Standing water is present on the green roof surface and in the [[underdrain]]/sub-drain system and bare soil areas are visible (Photo Source: J.V. Heidler)]]  
|-
|-
|'''[[Vegetation]]'''
|'''[[Vegetation]]'''
Line 261: Line 261:
*Remove undesirable [[vegetation]] biannually to quarterly;
*Remove undesirable [[vegetation]] biannually to quarterly;
*Prune [[shrubs]] and [[trees]] annually, and replace dead [[plants]] to maintain a minimum of 80% cover by the third growing season.   
*Prune [[shrubs]] and [[trees]] annually, and replace dead [[plants]] to maintain a minimum of 80% cover by the third growing season.   
|[[File:Pass Veg green roof.PNG|315px|thumb|center|The vegetation cover on the permeable pavement is turf grass as specified in the final design and contains very few weeds. (Photo source: WEF).]]  
|[[File:Pass Veg green roof.PNG|315px|thumb|center|The green roof vegetation looks healthy and well maintained.]]  
|[[File:Fail Veg green roof.PNG|290px|thumb|center|The turf grass cover on the permeable walkway is not thriving in some areas and needs cutting in others. It is also impairing the aesthetic value of the BMP.]]  
|[[File:Fail Veg green roof.PNG|315px|thumb|center|A portion of the vegetation on the green roof is dying or not thriving.]]  
|-
|-
|'''[[Overflow|Overflow Outlet]]'''
|'''[[Overflow|Overflow Outlet]]'''
Line 270: Line 270:
*Remove trash, natural debris and clippings biannually to quarterly;
*Remove trash, natural debris and clippings biannually to quarterly;
*Flush with hose or pressure washer annually to biannually
*Flush with hose or pressure washer annually to biannually
|[[File:Pass overflow green roof.PNG|320px|thumb|center|The overflow outlet is free of damage and obstruction and functions as designed to safely convey excess water from the BMP.]]  
|[[File:Pass overflow green roof.PNG|320px|thumb|center|The overflow outlets of this green roof are free of damage and obstruction and function as designed to safely convey excess water from the BMP (Photo Source: Vegetal I.D.).]]  
|[[File:Fail overflow green roof.PNG|280px|thumb|center|The overflow outlet is obstructed with sediment which impairs its function to convey excess water from the BMP.]]  
|[[File:Fail overflow green roof.PNG|320px|thumb|center|Sediment is accumulating at the overflow outlet which could impair its drainage function and cause surface ponding and vegetation die-off (Photo Source: Jorg Breuning).]]  
|-
|-
|'''[[Green roofs#Irrigation|Irrigation System]]'''
|'''[[Green roofs#Irrigation|Irrigation System]]'''
Line 280: Line 280:
*In the late fall/early winter, disconnect the system from the water supply, connect it to an air compressor and blow air through it to remove water and ensure the lines and parts are dry, shut off water supply to the roof, and drain all hose bibs;
*In the late fall/early winter, disconnect the system from the water supply, connect it to an air compressor and blow air through it to remove water and ensure the lines and parts are dry, shut off water supply to the roof, and drain all hose bibs;
*Remove any debris/sediment accumulated on filters biannually.
*Remove any debris/sediment accumulated on filters biannually.
|[[File:Pass irrigation system green roof.PNG|310px|thumb|center|The solid section of the sub-drain pipe is not obstructed by sediment, debris or roots and shows no signs of damage.]]  
|[[File:Pass irrigation system green roof.PNG|310px|thumb|center|The green roof is well covered by dense, attractive vegetation which helps maintain its stormwater treatment function and aesthetic value (Photo Source: Earth Rangers Centre)<ref>Earth Rangers. n.d. What is the Green Roof? Accessed 08 August 2022. http://www.ercshowcase.com/building-envelope/green-roof/</ref>]]  
|[[File:Fail irrigation system green roof.PNG|300px|thumb|center|A section of the sub-drain pipe has been crushed which substantially reduces its conveyance capacity]]  
|[[File:Fail irrigation system green roof.PNG|340px|thumb|center|A major portion of the green roof contains no living vegetation cover (Photo Source: Kevin Songer).]]  
|-
|-
|'''[[Green roofs#Design|Protective layers]]'''
|'''[[Green roofs#Design|Protective layers]]'''
Line 288: Line 288:
|
|
*Repair isolated leaks in the water-proofing membrane through deconstruction of a small portion of the green roof, patching with new material, and reconstruction.
*Repair isolated leaks in the water-proofing membrane through deconstruction of a small portion of the green roof, patching with new material, and reconstruction.
|[[File:Pass protective layers green roof.PNG|340px|thumb|center|The well is undamaged and accessible and the cap is in place and secured to prevent unauthorized access]]  
|[[File:Pass protective layers green roof.PNG|340px|thumb|center|There are no signs of damage to the concrete parapets along the perimeter and no uplift of green roof layers.]]  
|[[File:Fail protective layers green roof.PNG|300px|thumb|center|The well cap is missing and the casing is clogged by sediment, preventing access for monitoring and allowing sediment to flow into the sub-drain system.]]  
|[[File:Fail protective layers green roof.PNG|340px|thumb|center| One of the green roof growing media structures has been displaced and requires replacement and repair. (Photo Source: Kevin Songer]]  
|}
|}

Revision as of 20:10, 10 August 2022

Inspection & Maintenance Guidance of Green roofs best management practices. These specialized roofs are specially engineered and designed to support the growth of vegetation while protecting the structural integrity of the roof, aiding in helping to cool the building and effectively infiltrate, absorb and retain precipitation (TRCA, 2018).[1]

Overview[edit]

Green roofs are engineered rooftop design features that allow the growth of vegetation on rooftops and have numerous benefits. These LID BMPs can also be referred to as vegetated roofs, rooftop gardens or eco-roofs. A green roof acts like a lawn, meadow or garden by intercepting and absorbing a portion of the rainwater or snowmelt that falls on it. The typical layers of a green roof (in ascending order from the roof surface) include a water-proofing membrane, drainage layer, lightweight growing media layer and the vegetation. Excess water that is not absorbed by the growing media or vegetation is collected by the underlying drainage layer, directed to outlet structures and conveyed via the roof drainage system to another BMP or the municipal storm sewer system. A portion of the water absorbed by green roofs is returned to the atmosphere by evaporation and transpiration by plants. Green roofs are typically designed to retain precipitation from small to medium-sized (e.g., 5 to 25 mm rainfall depth) storm events. Overflow outlets are necessary to safely convey flows from major storm events.

Generalized cross-section view of a green roof showing key components and common layers that make up this LID BMP (TRCA, 2018)[1]

Some of the benefits of green roofs include:

  • The ability to reduce the quantity of pollutants and runoff being discharged to municipal storm sewers and receiving waters (i.e., rivers, lakes and wetlands);
  • Growing media and plants retain pollutants deposited from the atmosphere and reduce metals and other pollutants from conventional roof materials transported by runoff;
  • Improve the energy efficiency of the building due to their insulating properties;
  • Reduce the urban heat island effect;
  • Can provide food and shelter for pollinators;
  • Can provide aesthetic value as attractive landscaped features.


Key components of Underground Infiltration Systems to pay close attention to are the:

Associated Practices[edit]

  • Intensive green roofs contain greater than 15 cm depth of growing media, can be planted with deeply rooted plants (e.g., shrubs and trees) and can be designed to handle pedestrian traffic.
  • Extensive green roofs consist of a thinner growing media layer (15 cm depth or less) and are typically planted with.
  • Blue roofs are systems that temporarily capture rainwater using the roof as storage and allow it to evaporate and/or to be used for non-potable requirements (i.e. irrigation, toilet flushing, truck washing) and ultimately offset potable water demands.

Inspection and Testing Framework[edit]

Maintneance of the Green roofs filter bed and vegetation composition/condition being performed by staff (TRCA, 2018).[1]
Visual Indicators Framework - Green Roofs

Component

Indicators

Construction Inspection

Assumption Inspection

Routine Operation Inspection

Verification Inspection
Perimeter
BMP dimensions x x x
Growing medium/filter bed
Green roof structural integrity x x x
Standing water x x x
Filter bed erosion x x
Vegetation
Vegetation cover x x x x
Vegetation condition x x
Vegetation composition x x x
Overflow outlets
Overflow outlet obstruction x x x x



Testing Indicators Framework - Green Roofs

Component

Indicators

Construction Inspection

Assumption Inspection

Routine Operation Inspection

Verification Inspection
Testing Indicators
Soil characterization testing x x (x)
Green roof irrigation system testing x x x
Green roof leak detection testing x x
Note: (x) denotes indicators to be used for Performance Verification inspections only (i.e., not for Maintenance Verification inspections)

Construction Inspection Tasks[edit]

Construction inspections take place during several points in the construction sequence, specific to the type of LID BMP, but at a minimum should be done weekly and include the following:

  1. During site preparation, prior to BMP installation to ensure the roof structure is ready for green roof construction work and confirm that BMP layout area matches approved design drawings and that construction materials meet design specifications
  2. After installation of leak detection system (if applicable) to ensure it was done properly
  3. At installation of water-proofing membrane, prior to installation of root barrier, drainage layer and overflow outlets to ensure it was done properly and to confirm that slopes are acceptable
  4. After installation of root barrier, drainage layer (including filter fabric/layer) and overflow outlets, prior to installation of growing medium and plants to ensure it was done properly and confirm that depth and slopes are acceptable
  5. After installation of growing medium layer and plants to ensure it was done properly and to confirm depth, slopes and elevations at overflow outlets are acceptable; After installation of irrigation system to confirm system is functioning
  6. Prior to hand-off points in the construction sequence when the contractor responsible for the work changes (i.e., hand-offs between the building and green roof installation contractors)
  7. After every large storm event (e.g., 15 mm rainfall depth or greater) to ensure roof drainage or flow diversion devices are functioning and adequately maintained. You can also download and print the table here


A technician using a non-invasive locate method to determine the source of a leak in a Green roof membrane (Construction Canada, 2012.)[2]


An example of a conceptual planting design for a green roof project in Mill Valley, California (O’Connell Landscape, 2010).[3]
Green Roofs: Construction Inspections

Construction Sequence Step & Timing

Inspection Item

Observations*
Site Preparation - During site preparation, prior to BMP installation Ensure the roof structure is ready for green roof construction work
BMP layout area and dimensions match approved design drawings
CDA is stabilized or runoff is diverted around BMP layout area
Construction materials have been confirmed to meet design specifications
Leak detection System - After installation of leak detection system (if applicable), prior to installation of water-proofing membrane Quality control check leak detection system installation
Water Proofing Membrane – After installation of waterproofing membrane, prior to installation of root barrier, drainage layer and overflow outlets Quality control check membrane installation
Confirm that slopes conform with approved design drawings
Root barrier / Drainage layer and Overflow outlets – After installation of root barrier, drainage layer (including filter fabric) and overflow outlets, prior to installation of growing medium layer and plants Quality control check root barrier and drainage layer installations
Installation of drainage layer (e.g., depth and slope) is acceptable
Installations of overflow outlets (e.g., elevation and slope) are acceptable
Filter bed – After installation of filter bed (growing medium layer and plants) Quality control check installation of any structural components of growing medium layer (if applicable)
Installation of growing medium (e.g., depth, elevations at overflow outlets) is acceptable
Growing medium is free of ruts, local depressions
Planting material meets approved planting plan specifications (plant types and quantities)
Quality control check installation of erosion matting/protection (if applicable)
Irrigation System - After installation of irrigation system Confirm installation is acceptable and system is functioning (through testing)

Routine Maintenance - Key Components and I&M Tasks[edit]

Regular inspections (twice annually, at a minimum) done as part of routine maintenance tasks over the operating phase of the BMP life cycle to determine if maintenance task frequencies are adequate and determine when rehabilitation or further investigations into BMP function are warranted.

The table below describes routine maintenance tasks for green roofs, organized by BMP component, along with recommended minimum frequencies. It also suggests higher frequencies for certain tasks that may be warranted for BMPs located in highly visible or high pedestrian traffic locations or intensive green roofs featuring shrubs, trees and a wider variety of vegetation types. Tasks involving removal of trash, debris and weeding/trimming or replacement of dead plants may need to be done more frequently in such contexts. For further guidance on maintenance of vegetation cover on green roofs, refer to ASTM D2400/E2400M-06 Standard Guide for Selection, Installation and Maintenance of Plants for Green Roof Systems (ASTM International, 2015)[4]

Individuals conducting vegetation maintenance and in particular, weeding (i.e., removal of undesirable vegetation), should be familiar with the species of plants specified in the planting plan and experienced in plant identification and methods of removing/controlling noxious weeds. Key resources on these topics are provided below at the links provided:

Green Roofs: Key Components, Descriptions and Routine I&M Requirements
Component Description Inspection & Maintenance Tasks (Pass) Photo Example (Fail) Photo Example
Perimeter

Separates the green roof from the roof edges and other structures; kept clear of vegetation and natural debris as a fire prevention measure. Parapets or other wind break structures may also be present around the perimeter to help prevent wind scour of growing media.

  • Check for damage or vegetation;
  • Remove any vegetation or natural debris annually to biannually.
The footprint area of the green roof matches what was specified in the final design.
The footprint area of the green roof is significantly smaller than what was specified in the final design.
Growing medium/filter bed

Flat or gently sloping area covered by growing medium and a mixture of plants. Growing medium varies according to the green roof system or product but is generally designed to be porous and lightweight with adequate fertility and moisture retention to support plant growth while maintaining drainage of excess water within a few hours after a storm or snowmelt event. May be covered by matting/other erosion control product to prevent rain/wind scour while plantings are becoming established.

  • Check for standing water, animal burrows or damage from foot traffic, rain or wind scour;
  • Replace erosion/scour protection where missing or uplifted;
  • Remove trash and natural debris annually to biannually.
There is no standing water on the green roof surface shortly after a storm event.
Standing water is present on the green roof surface and in the underdrain/sub-drain system and bare soil areas are visible (Photo Source: J.V. Heidler)
Vegetation

Plants should be tolerant of the harsh conditions prevalent on rooftops. Use of a wide variety of plants may improve resilience but complicates maintenance and may require staff or contractors trained in horticulture

  • Maintenance is similar to a conventional perennial planting bed;
  • Water bi-weekly in the absence of rain during first two months and as needed for the remainder of the first growing season;
  • Remove undesirable vegetation biannually to quarterly;
  • Prune shrubs and trees annually, and replace dead plants to maintain a minimum of 80% cover by the third growing season.
The green roof vegetation looks healthy and well maintained.
A portion of the vegetation on the green roof is dying or not thriving.
Overflow Outlet

Flows exceeding the storage capacity of the BMP are conveyed to an adjacent drainage system via an overflow outlet structure and the roof drainage system.

  • Remove trash, natural debris and clippings biannually to quarterly;
  • Flush with hose or pressure washer annually to biannually
The overflow outlets of this green roof are free of damage and obstruction and function as designed to safely convey excess water from the BMP (Photo Source: Vegetal I.D.).
Sediment is accumulating at the overflow outlet which could impair its drainage function and cause surface ponding and vegetation die-off (Photo Source: Jorg Breuning).
Irrigation System

Most green roofs will require watering over their operating life cycle, especially during the first 2 months. Systems can range from simple hose bibs, garden hoses and sprinklers to intelligent automated systems that schedule watering based on weather forecasts and cistern water levels.

  • In the spring, reconnect all parts to the water supply, flush lines to clear out any debris or sediment and test to confirm that the system is undamaged and functioning well;
  • In the late fall/early winter, disconnect the system from the water supply, connect it to an air compressor and blow air through it to remove water and ensure the lines and parts are dry, shut off water supply to the roof, and drain all hose bibs;
  • Remove any debris/sediment accumulated on filters biannually.
The green roof is well covered by dense, attractive vegetation which helps maintain its stormwater treatment function and aesthetic value (Photo Source: Earth Rangers Centre)[5]
A major portion of the green roof contains no living vegetation cover (Photo Source: Kevin Songer).
Protective layers

May be one or two layers; designed to protect the roof deck from water damage, including a waterproofing membrane, a root barrier that protects the water-proofing membrane from root penetration and degradation by microbial activity.

  • Repair isolated leaks in the water-proofing membrane through deconstruction of a small portion of the green roof, patching with new material, and reconstruction.
There are no signs of damage to the concrete parapets along the perimeter and no uplift of green roof layers.
One of the green roof growing media structures has been displaced and requires replacement and repair. (Photo Source: Kevin Songer
  1. 1.0 1.1 1.2 TRCA. 2018. Fact Sheet - Inspection and Maintenance of Stormwater Best Management Practices: Green Roofs. https://sustainabletechnologies.ca/app/uploads/2018/02/Green-Roofs-Fact-Sheet.pdf
  2. Construction Canada. 2012. Waterproofing considerations for green roofs. Photo source: Detec Systems. 1 March 2012. Accessed August 8 2022. https://www.constructioncanada.net/waterproofing-considerations-for-green-roofs/2/
  3. O’Connell Landscape. 2010. FROM THE DRAWING BOARD: MILL VALLEY & CORTE MADERA PLANTINGS. Authored 13 January 2010. Accessed 08 August 2022. https://oclandscape.com/ocblog/from-the-drawing-board-mill-valley-corte-madera-plantings/
  4. ASTM International. 2015. Standard Guide for Selection, Installation, and Maintenance of Plants for Green Roof Systems. Designation: E 2400 – 06. http://hydro.engr.scu.edu/files/green_roof/ASTM_E2400-06.pdf
  5. Earth Rangers. n.d. What is the Green Roof? Accessed 08 August 2022. http://www.ercshowcase.com/building-envelope/green-roof/