Difference between revisions of "Overflow: Installation"

From LID SWM Planning and Design Guide
Jump to navigation Jump to search
(Created page with "Overflows are features of inline facilities and convey larger storm events out of the LID feature. Construction Steps: #Connect the overflow drain to the underdrain #Install overflow pit to grade at the location specified in the contract documents #Fit a metal, domed grate to the overflow Key Inspection Points: *Overflow drain matches design specifications *Overflow pit is positioned at the maximum water surface elevation of the practice, as per the cont...")
 
 
(15 intermediate revisions by 3 users not shown)
Line 1: Line 1:
[[Overflow|Overflows]] are features of inline facilities and convey larger storm events out of the LID feature.
[[Overflow|Overflows]] are features of inline facilities and convey larger storm events out of the LID feature.


Construction Steps:
'''Construction Steps:'''
#Connect the overflow drain to the underdrain
#Connect the overflow drain to the underdrain.
#Install overflow pit to grade at the location specified in the contract documents
#Fit a metal, domed grate to the overflow.
#Fit a metal, domed grate to the overflow
#Install overflow pit to grade at the location specified in the contract documents.


Key Inspection Points:
'''Key Inspection Points:'''
*Overflow drain matches design specifications
*Overflow drain matches design specifications.
*Overflow pit is positioned at the maximum water surface elevation of the practice, as per the contract documents
*Overflow pit is positioned at the maximum water surface elevation of the practice, as per the contract documents.
*Sufficient freeboard is provided between the overflow and inlet such that the inlet is not inundated by design storm flows
*Sufficient freeboard is provided between the overflow and inlet such that the inlet is not inundated by design storm flows.
*Overflow grate matches design specifications
*Overflow grate matches design specifications.
*Overflow grates located in high-traffic areas are screwed on or equipped with locks
*Overflow grates located in high-traffic areas are screwed on or equipped with locks.


Mistakes to Avoid:
'''Mistakes to Avoid:'''
*Backflows – ensure that backflows are avoided by confirming that inlet and overflow elevations match design specifications with surveys
*Backflows: Ensure that backflows are avoided by confirming that inlet and overflow elevations match design specifications with surveys.
*Incorrect sequencing – install overflow drain prior to backfilling with granular material and engineered soil
*Incorrect sequencing: Install overflow drain prior to backfilling with granular material and engineered soil.
*Incorrect grate material – avoid using plastic overflow grates due to breakages and UV degradation
*Incorrect grate material: Avoid using plastic overflow grates due to breakages and UV degradation.
 
<gallery mode="packed" widths=300px heights=300px>
overflow-pipe-install.jpg | Overflow pipe installed to an underdrain T-connection. (Photo Source: CVC, 2010)
overflow-plastic-cap.jpg | Overflow installed with a plastic cap. Note that the use of plastic grates is discouraged. (Photo Source: CVC, 2012)
 
</gallery>

Latest revision as of 01:33, 29 September 2022

Overflows are features of inline facilities and convey larger storm events out of the LID feature.

Construction Steps:

  1. Connect the overflow drain to the underdrain.
  2. Fit a metal, domed grate to the overflow.
  3. Install overflow pit to grade at the location specified in the contract documents.

Key Inspection Points:

  • Overflow drain matches design specifications.
  • Overflow pit is positioned at the maximum water surface elevation of the practice, as per the contract documents.
  • Sufficient freeboard is provided between the overflow and inlet such that the inlet is not inundated by design storm flows.
  • Overflow grate matches design specifications.
  • Overflow grates located in high-traffic areas are screwed on or equipped with locks.

Mistakes to Avoid:

  • Backflows: Ensure that backflows are avoided by confirming that inlet and overflow elevations match design specifications with surveys.
  • Incorrect sequencing: Install overflow drain prior to backfilling with granular material and engineered soil.
  • Incorrect grate material: Avoid using plastic overflow grates due to breakages and UV degradation.