Difference between revisions of "Notation"
Jump to navigation
Jump to search
Jenny Hill (talk | contribs) |
Jenny Hill (talk | contribs) |
||
| Line 4: | Line 4: | ||
;q | ;q | ||
:infiltration rate in (length per time, usually mm/hr) (before or after application of safety factor?) | :infiltration rate in (length per time, usually mm/hr) (before or after application of safety factor?) | ||
;R<sub>a</sub> | ;R<sub>a</sub> | ||
| Line 13: | Line 10: | ||
;R<sub>b</sub> | ;R<sub>b</sub> | ||
:Rise of compensation gradient for an enhanced swale (length, usually m) | :Rise of compensation gradient for an enhanced swale (length, usually m) | ||
;SCF | |||
:Safety correction factor (dimensionless) | |||
Revision as of 18:58, 27 September 2017
- m
- run of side slopes in channel cross sections (length, but usually expressed as a ratio in relation to rise. e.g. where side side slopes = 1:3.5, m = 3.5)
- q
- infiltration rate in (length per time, usually mm/hr) (before or after application of safety factor?)
- Ra
- Existing rise of swale gradient (length, usually m)
- Rb
- Rise of compensation gradient for an enhanced swale (length, usually m)
- SCF
- Safety correction factor (dimensionless)