Difference between revisions of "Dry ponds: TTT"
Jump to navigation
Jump to search
Jenny Hill (talk | contribs) |
Jenny Hill (talk | contribs) m |
||
(12 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
[[File:Storage TTT.png|thumb|[[Dry ponds]] are found in storage element in the LID TTT.]] | [[File:Storage TTT.png|thumb|[[Dry ponds]] are found in storage element in the LID TTT]] | ||
Dry ponds | [[File:Pond curves.png|thumb|The largest area is at the top, level 0 m; each subsequent lower depth has a smaller area]] | ||
{{Clickable button|[[File:TTT.png|350 px|link=http://www.sustainabletechnologies.ca/wp/low-impact-development-treatment-train-tool/]]}} | |||
{|class="wikitable" | |||
|+A [[Dry ponds|dry pond]] as a storage element (key parameters) in the Treatment Train Tool. | |||
|- | |||
!colspan = "2"|Stage Storage | |||
|- | |||
|Name||Important to have a unique name, to connect it with the catchment area | |||
|- | |||
|Storage type||Dry detention ponds | |||
|- | |||
|Bottom elevation (m)||This is important to correspond with other components, <br>e.g. when the overflow is coupled to another BMP within a treatment train | |||
|- | |||
|Maximum depth (m)|| | |||
|- | |||
|Lined/unlined||Unlined (ideally) | |||
|- | |||
|Underlying soil||Choose from five; sandy soils drain more quickly. | |||
|- | |||
|Evaporation factor||? | |||
|- | |||
|Suction head (mm)||? | |||
|- | |||
|Saturated conductivity (mm/hr)||? | |||
|- | |||
|Initial soil moisture deficit (fraction)||? | |||
|- | |||
!colspan = "2" align = center"|Curves | |||
|- | |||
|colspan = 2|The Curves table is designed to accommodate the side slopes. The top line begins at 0 m, with subsequent depths in the following lines. | |||
|} |
Latest revision as of 03:01, 9 November 2017
Stage Storage | |
---|---|
Name | Important to have a unique name, to connect it with the catchment area |
Storage type | Dry detention ponds |
Bottom elevation (m) | This is important to correspond with other components, e.g. when the overflow is coupled to another BMP within a treatment train |
Maximum depth (m) | |
Lined/unlined | Unlined (ideally) |
Underlying soil | Choose from five; sandy soils drain more quickly. |
Evaporation factor | ? |
Suction head (mm) | ? |
Saturated conductivity (mm/hr) | ? |
Initial soil moisture deficit (fraction) | ? |
Curves | |
The Curves table is designed to accommodate the side slopes. The top line begins at 0 m, with subsequent depths in the following lines. |