Difference between revisions of "Rain barrels"

From LID SWM Planning and Design Guide
Jump to navigation Jump to search
(Created page with "This article is about small, outdoor, residential systems. <br> For larger, multi-residential or commercial integrated systems, see Rainwater Harvesting <h3Blue>Over...")
(No difference)

Revision as of 15:24, 1 June 2017

This article is about small, outdoor, residential systems.
For larger, multi-residential or commercial integrated systems, see Rainwater Harvesting



<h3Blue>Overview</h3Blue>

caption

Rain barrels are an above ground form of rainwater harvesting, typically used in residential settings. The precipitation flows from the roof, to the guttering and down the downspout before being diverted to the rain barrel for storage.

Rain barrels are an ideal technology for: 
*Individual homes, where the owners can make good use of the water to irrigate a garden  
*Retrofitting single family home neighborhoods
*Areas with mandatory downspout disconnection programs
  • Rain barrels are an ideal technology for:
  • • Individual homes, where the owners can make good use of the water to irrigate a garden
  • • Retrofitting single family home neighborhoods
  • • Areas with mandatory downspout disconnection programs

Planning Considerations[edit]

Watershed scale[edit]

Traditional rain barrels require a high degree of owner compliance to perform as a reliable stormwater management control strategy at watershed scale. To overcome this limitation, electronically monitored and controlled rain barrels are a new adaptation on the market in Ontario[1]. This system forecasts rain and automatically discharges the contents of the rain barrel to a designated infiltration area of the property in advance of the storm.

Site Scale[edit]

Place in the Treatment Train[edit]

In most cases the catchment area will be the roof of the building and the rain barrel will be the first interception of water from the downspout.
How many downspouts does the roof have? Will more than one barrel be required? Do the downspouts require reconfiguration?

Cistern[edit]

Expansion caused by freezing water will damage the barrel. The easiest way to prevent this damage is to drain and disconnect the system in advance of sub-zero temperatures[2]. It is recommended that an overflow strategy be part of designing a rain barrel system. Excess water should be directed away from the property foundations. Suitable discharge points for overflow include: a rain garden, a french drain, or the base of a tree.


Design[edit]

Filter[edit]

caption

The water in the barrel will remain fresher for use if leave litter is excluded. Leaves can be filtered out by a screen on top of the cistern, or by using a device fitted into the downspout.

Sizing and Cisterns[edit]

Roof catchment area can be estimated using one of many online digital maps. e.g. Distance can be measured on Google maps by right clicking on the desired start point.
1 mm of rain landing on 1 m2 of roof top produces 1 litre of water to store.
So a 5 mm storm on a 75 m2 roof would require 375 L of storage volume.
Rain barrels or cisterns are readily available in pre-formed plastic up to around 500L.
Alternatives include:

  • modular systems to increase total storage capacity,
  • slim designs to fit small spaces,
  • aesthetic designs for high profile locations,

Many people choose to reuse or recycle a container as a rain barrel or cistern. Repurposed containers should be screened to prevent mosquitoes from breeding, and should be opaque to prevent algae from growing.


Performance[edit]

CSA STANDARD !!!


Incentives and Credits[edit]

Region of Peel offers rain barrels for sale at their Community Recycling Centres[3].


See Also[edit]


References[edit]


External Links[edit]