Changes

===Snow Piles===

===Snow Piles===

Storage locations for snow piles should be in sunny areas with low traffic. Consider grading the storage location to distribute the melt-water as sheet flow over a [[Vegetated filter strips|grass filter strip]] into an adjacent BMP, such as a [[Bioretention|bioretention cell]] or [[Infiltration trenches|infiltration trench]]. In some cases, with careful vegetation selection and adequate drainage, the BMP itself can serve as a snow storage location. Snow storage areas should be clearly marked for seasonal maintenance staff.

*Storage locations for snow piles should be in sunny areas with low traffic.  

*Consider grading the storage location to distribute the melt-water as sheet flow over a [[Vegetated filter strips|grass filter strip]] into an adjacent BMP, such as a [[Bioretention|bioretention cell]] or [[Infiltration trenches|infiltration trench]]. In some cases, with careful vegetation selection and adequate drainage, the BMP itself can serve as a snow storage location.  

*Snow storage areas should be clearly marked for seasonal maintenance staff.}}

 

===Sidewalk Design and Pedestrian Flow===  

===Sidewalk Design and Pedestrian Flow===  

Sidewalks which receive infrequent use could be closed for the winter season. Maintained sidewalks should be ≥ 1.5 m wide to accommodate plowing and minimise the salting required. Using textured pavers can improve grip for pedestrians, again reducing the salt required. In busy areas around building entrances, covered walkways and heated mats also reduce salt requirements.  

Sidewalks which receive infrequent use could be closed for the winter season. Maintained sidewalks should be ≥ 1.5 m wide to accommodate plowing and minimise the salting required. Using textured pavers can improve grip for pedestrians, again reducing the salt required. In busy areas around building entrances, covered walkways and heated mats also reduce salt requirements.