Difference between revisions of "Topsoil"

From LID SWM Planning and Design Guide
Jump to navigation Jump to search
 
(12 intermediate revisions by the same user not shown)
Line 5: Line 5:
</ul>
</ul>


The factors to consider in determining a suitable soil mix for a vegetated stormwater practice include the following:
The factors to consider in determining if a topsoil is suitable for use as planting soil for a vegetated stormwater practice, or use in producing a bioretention filter media mixture include the following:
* Must be friable and capable of sustaining vigorous plant growth;
* Must be free from toxic material and roots, stones or debris over 50 mm (2") in diameter;
* Should not have been passed through sieves or screens smaller than 50 mm (2”) to avoid eliminating peds;
* Should have a Loamy Sand, Sandy Loam, Sandy Clay Loam, Loam or Silty Loam soil texture;
* For use as planting soil for a vegetated stormwater practice , the topsoil must contain a minimum of 5% organic matter by dry weight or be amended so, through addition of an organic soil conditioner;
* For use in producing bioretention filter media Blend B (water quality treatment priority), the topsoil must contain at least 9%, and not greater than 36% clay-sized particles and at least 2% organic matter by dry weight.
* Must have a pH of between 6.0 and 8.0;
* Must have a sodium absorption ratio less than 15;
* Must have a cationic exchange capacity greater than 10 milliequivalents per 100 grams (meq/100 g).


Specify that topsoil must be friable, neither heavy clay nor of a very light sandy nature.  
Specify that 4 litre samples of topsoil, from each source to be drawn upon, be provided to the consultant for visual inspection, along with topsoil quality test results from an accredited soil testing laboratory, or a quality assurance certificate from the supplier.  


An example of sandy loam topsoil is
We recommend a planting soil or filter media depth of 300 mm to support grasses, 600 mm for shrubs and perennials, and 1000 mm for trees.
*60% sand,  
*25% silt,
*15% clay,
*organic matter 5%, and
*pH value of 6 - 7.5.  


Topsoil must be capable of sustaining vigorous plant growth and be free from toxic material and roots, stones or debris over 50 mm in diameter. Specify that samples of topsoil from each source to be drawn upon be provided to the consultant for visual inspection, along with topsoil quality test results from an accredited soil testing laboratory, or a quality assurance certificate from the supplier. We recommend restoring a minimum topsoil depth of 200 mm for planting turf areas, and 400 mm for planting perennials, shrubs and trees.


[[category: materials]]
[[category: materials]]

Latest revision as of 16:53, 11 September 2020

  • Topsoil may be material that was stripped from the project site and stored in stockpiles for re-use, or material imported to the site from a supplier provided the physical and chemical characteristics are within acceptable ranges.
  • Topsoil shall be in compliance with Ontario Regulation 153/04 Record of Site Condition standards for soil quality or as amended through Ontario Management of Excess Soil - A Guide for Best Management Practices.
  • Soil laboratory reports shall certify the material to be suitable for re-use on residential, parkland, institutional, industrial, commercial, or community landscapes for the germination of seeds and the support of vegetative growth.

The factors to consider in determining if a topsoil is suitable for use as planting soil for a vegetated stormwater practice, or use in producing a bioretention filter media mixture include the following:

  • Must be friable and capable of sustaining vigorous plant growth;
  • Must be free from toxic material and roots, stones or debris over 50 mm (2") in diameter;
  • Should not have been passed through sieves or screens smaller than 50 mm (2”) to avoid eliminating peds;
  • Should have a Loamy Sand, Sandy Loam, Sandy Clay Loam, Loam or Silty Loam soil texture;
  • For use as planting soil for a vegetated stormwater practice , the topsoil must contain a minimum of 5% organic matter by dry weight or be amended so, through addition of an organic soil conditioner;
  • For use in producing bioretention filter media Blend B (water quality treatment priority), the topsoil must contain at least 9%, and not greater than 36% clay-sized particles and at least 2% organic matter by dry weight.
  • Must have a pH of between 6.0 and 8.0;
  • Must have a sodium absorption ratio less than 15;
  • Must have a cationic exchange capacity greater than 10 milliequivalents per 100 grams (meq/100 g).

Specify that 4 litre samples of topsoil, from each source to be drawn upon, be provided to the consultant for visual inspection, along with topsoil quality test results from an accredited soil testing laboratory, or a quality assurance certificate from the supplier.

We recommend a planting soil or filter media depth of 300 mm to support grasses, 600 mm for shrubs and perennials, and 1000 mm for trees.