Difference between revisions of "Gravel"

From LID SWM Planning and Design Guide
Jump to navigation Jump to search
m (Redirected page to Aggregates)
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
For advice on decorative surface aggregates see '''[[Stone]]'''
#REDIRECT [[Aggregates]]
 
*Granular material for underdrains should be clear crushed 20 or 50 mm diameter stone graded in accordance with [https://www.astm.org/Standards/D2940.htm ASTM D 2940],
*The 20 mm clear crushed aggregate permits the use of an overlaid layer of high performance bedding (HPB) as a choker layer,
*The void space ratio should be > 0.35 (or > 35%)
 
All gravel should meet the following criteria:
*Maximum wash loss of 0.5%
*Minimum durability index of 35
*Maximum abrasion of 10% for 100 revolutions and maximum of 50% for 500 revolutions
 
[[Category:materials]]

Latest revision as of 20:43, 5 March 2018

Redirect to: