Difference between revisions of "Bioswales"
Jump to navigation
Jump to search
Jenny Hill (talk | contribs) (→Design) |
Jenny Hill (talk | contribs) (→Design) |
||
Line 14: | Line 14: | ||
==Design== | ==Design== | ||
Bioswales are sized as narrow linear [[bioretention cells]]. [[Drawdown times]] of bioswales are typically lower than other geometric configurations of bioretention facilities. | |||
'''[[Infiltration: Sizing and modeling]]''' | '''[[Infiltration: Sizing and modeling]]''' |
Revision as of 00:19, 8 September 2017
This article is about installations designed to capture and convey surface runoff along a vegetated channel, whilst also promoting infiltration.
For underground conveyance which promotes infiltration, see Exfiltration trenches.
For design recommendations on grassed channels, see Enhanced grass swales.
Overview[edit]
The fundamental components of a bioswale are:
- A graded channel
- Planting
- Filter media, to permit infiltration into the facility (not necessarily to soils below)
Additional components may include:
- Underdrain with clean out and inspection ports
- Impermeable membrane to prevent infiltration to soils below
- Check dams to facilitate short tern ponding
Planning considerations[edit]
Design[edit]
Bioswales are sized as narrow linear bioretention cells. Drawdown times of bioswales are typically lower than other geometric configurations of bioretention facilities.