Difference between revisions of "Check dams"
Jump to navigation
Jump to search
Jenny Hill (talk | contribs) (Created page with "Check dams usually consist of crushed rock gabions, or pre-treated timber up to 0.6 m in height. Rocks used in check dams should have median diameter 25-75 mm. The spacing of...") |
Jenny Hill (talk | contribs) |
||
| Line 1: | Line 1: | ||
Check dams usually consist of crushed rock gabions, or pre-treated timber up to 0.6 m in height. Rocks used in check dams should have median diameter 25-75 mm. | {plain list|1= | ||
The spacing of dams should not exceed the horizontal distance from the toe of the upstream dam to the same elevation on the downstream dam. | *Check dams usually consist of crushed rock gabions, or pre-treated timber up to 0.6 m in height. | ||
Where check dams are used, the maximum design depth of ponded water must be 0.5 m. | *Rocks used in check dams should have median diameter 25-75 mm. | ||
*The spacing of dams should not exceed the horizontal distance from the toe of the upstream dam to the same elevation on the downstream dam. | |||
*Where check dams are used, the maximum design depth of ponded water must be 0.5 m.} | |||
Revision as of 01:11, 19 September 2017
{plain list|1=
- Check dams usually consist of crushed rock gabions, or pre-treated timber up to 0.6 m in height.
- Rocks used in check dams should have median diameter 25-75 mm.
- The spacing of dams should not exceed the horizontal distance from the toe of the upstream dam to the same elevation on the downstream dam.
- Where check dams are used, the maximum design depth of ponded water must be 0.5 m.}