Line 1: |
Line 1: |
| [[File:Storage TTT.png|thumb|[[Dry ponds]] are found in storage element in the LID TTT.]] | | [[File:Storage TTT.png|thumb|[[Dry ponds]] are found in storage element in the LID TTT]] |
| Dry ponds are a storage element in the Treatment Train Tool. | | [[File:Pond curves.png|thumb|The largest area is at the top, level 0 m; each subsequent lower depth has a smaller area]] |
| | {{Clickable button|[[File:TTT.png|350 px|link=http://www.sustainabletechnologies.ca/wp/low-impact-development-treatment-train-tool/]]}} |
| | |
| | {|class="wikitable" |
| | |+A [[Dry ponds|dry pond]] as a storage element (key parameters) in the Treatment Train Tool. |
| | |- |
| | !colspan = "2"|Stage Storage |
| | |- |
| | |Name||Important to have a unique name, to connect it with the catchment area |
| | |- |
| | |Storage type||Dry detention ponds |
| | |- |
| | |Bottom elevation (m)||This is important to correspond with other components, <br>e.g. when the overflow is coupled to another BMP within a treatment train |
| | |- |
| | |Maximum depth (m)|| |
| | |- |
| | |Lined/unlined||Unlined (ideally) |
| | |- |
| | |Underlying soil||Choose from five; sandy soils drain more quickly. |
| | |- |
| | |Evaporation factor||? |
| | |- |
| | |Suction head (mm)||? |
| | |- |
| | |Saturated conductivity (mm/hr)||? |
| | |- |
| | |Initial soil moisture deficit (fraction)||? |
| | |- |
| | !colspan = "2" align = center"|Curves |
| | |- |
| | |colspan = 2|The Curves table is designed to accommodate the side slopes. The top line begins at 0 m, with subsequent depths in the following lines. |
| | |} |