Difference between revisions of "Dry ponds: TTT"

From LID SWM Planning and Design Guide
Jump to navigation Jump to search
(Created page with "thumb|[[Dry ponds are found in storage element in the LID TTT. Dry ponds are a storage element in the Treatment Train Tool.")
 
m
 
(13 intermediate revisions by the same user not shown)
Line 1: Line 1:
[[File:Storage TTT.png|thumb|[[Dry ponds]] are found in storage element in the LID TTT.  
[[File:Storage TTT.png|thumb|[[Dry ponds]] are found in storage element in the LID TTT]]
Dry ponds are a storage element in the Treatment Train Tool.
[[File:Pond curves.png|thumb|The largest area is at the top, level 0 m; each subsequent lower depth has a smaller area]]
{{Clickable button|[[File:TTT.png|350 px|link=http://www.sustainabletechnologies.ca/wp/low-impact-development-treatment-train-tool/]]}}
{|class="wikitable"
|+A [[Dry ponds|dry pond]] as a storage element (key parameters) in the Treatment Train Tool.
|-
!colspan = "2"|Stage Storage
|-
|Name||Important to have a unique name, to connect it with the catchment area
|-
|Storage type||Dry detention ponds
|-
|Bottom elevation (m)||This is important to correspond with other components, <br>e.g. when the overflow is coupled to another BMP within a treatment train
|-
|Maximum depth (m)||
|-
|Lined/unlined||Unlined (ideally)
|-
|Underlying soil||Choose from five; sandy soils drain more quickly.
|-
|Evaporation factor||?
|-
|Suction head (mm)||?
|-
|Saturated conductivity (mm/hr)||?
|-
|Initial soil moisture deficit (fraction)||?
|-
!colspan = "2" align = center"|Curves
|-
|colspan = 2|The Curves table is designed to accommodate the side slopes. The top line begins at 0 m, with subsequent depths in the following lines.
|}

Latest revision as of 03:01, 9 November 2017

Dry ponds are found in storage element in the LID TTT
The largest area is at the top, level 0 m; each subsequent lower depth has a smaller area

TTT.png

A dry pond as a storage element (key parameters) in the Treatment Train Tool.
Stage Storage
Name Important to have a unique name, to connect it with the catchment area
Storage type Dry detention ponds
Bottom elevation (m) This is important to correspond with other components,
e.g. when the overflow is coupled to another BMP within a treatment train
Maximum depth (m)
Lined/unlined Unlined (ideally)
Underlying soil Choose from five; sandy soils drain more quickly.
Evaporation factor ?
Suction head (mm) ?
Saturated conductivity (mm/hr) ?
Initial soil moisture deficit (fraction) ?
Curves
The Curves table is designed to accommodate the side slopes. The top line begins at 0 m, with subsequent depths in the following lines.