2,216
edits
Changes
Jump to navigation
Jump to search
Line 23:
Line 23: *[[Bedding layer]] and [[Permeable pavements: Specifications|joint filler]] should consist of [[clear stone]] and [[gravel]] rather than [[sand]] to prevent [[clogging]]. *Granular materials should not be applied as anti-skid agents during [[winter]] because they can quickly clog the system. *[[Winter Management|Winter maintenance]] practices should be limited to plowing, with [[Salt|de-icing salts]] applied sparingly. *The [[Permeable pavements: Specifications|slope]] of the permeable pavement surface should be at least 1% and no greater than 5%. *The impervious land surrounding and draining onto the pavement should not exceed the area of the permeable pavement (1:1 / I:P ratio). *Pervious surfaces should not drain onto the pavement. *The [[Permeable pavements: Specifications|storage layer]] must be [[Permeable pavements: Sizing|sized to accommodate runoff]] from the pavement and any impermeable areas draining to it.<br>
Permeable pavements: Life Cycle Costs (view source)
Revision as of 19:59, 15 December 2022
, 1 year ago→Design Assumptions
* Default Base depth of 100 millimeters.
* Default Base depth of 100 millimeters.
* Default Sub-base depth (50 mm dia clear stone) of 200 millimeters.
* Default Sub-base depth (50 mm dia clear stone) of 200 millimeters.
* An underdrain (minimum 150 mm perforated pipe) is included in Partial Infiltration and No Infiltration design configurations only.
* An underdrain (minimum 150 mm perforated pipe) is included in Partial Infiltration and No Infiltration design configurations only.<br>
===Notes===
===Notes===