Changes

Jump to navigation Jump to search
m
Line 61: Line 61:
STEP has developed  [http://www.sustainabletechnologies.ca/wp/home/urban-runoff-green-infrastructure/low-impact-development/low-impact-development-life-cycle-costs/  a useful tool for estimating the capital and life-cycle costs]of LID practices. STEP built this tool after evaluating LID practices and design scenarios for input costs, maintenance requirements, rehabilitation costs and practice designs relevant to Canadian climates.
STEP has developed  [http://www.sustainabletechnologies.ca/wp/home/urban-runoff-green-infrastructure/low-impact-development/low-impact-development-life-cycle-costs/  a useful tool for estimating the capital and life-cycle costs]of LID practices. STEP built this tool after evaluating LID practices and design scenarios for input costs, maintenance requirements, rehabilitation costs and practice designs relevant to Canadian climates.


==Selection of suite of LIDs==
==Selection of suite of LIDs: the Treatment Train Tool==
[[File:LIDTTT.png|thumb|LID Treatment Train Tool]]
[[File:LIDTTT.png|thumb|LID Treatment Train Tool]]
In order to assess if the selected suite of BMPs effectively meet the design criteria, use either computer models or simple spreadsheet models. Base Model selection on the size and type of development. A wide range of simple to complex computer models such as Visual OTTHYMO, SWMM, SWMMHYNO, HSP-F andQUALHYMO are available.
In order to assess if the selected suite of BMPs effectively meet the design criteria, use either computer models or simple spreadsheet models. Base Model selection on the size and type of development. A wide range of simple to complex computer models such as Visual OTTHYMO, SWMM, SWMMHYNO, HSP-F andQUALHYMO are available.


Recently, Lake Simcoe Region Conservation Authority (LSRCA), Credit Valley Conservation (CVC) and Toronto and Region Conservation Authority (TRCA) developed the [http://www.sustainabletechnologies.ca/wp/low-impact-development-treatment-train-tool/|Low Impact Development Treatment Train Tool to help developers, consultants, municipalities and landowners understand and implement sustainable stormwater management planning and design practices. The tool's purpose is to analyze annual and event-based runoff volumes and pollutant load removal by the use of LID best management practices. It provides preliminary water budget analysis, (i.e. surface ET, surface runoff, infiltration-to-soil and pollutant-load-removal estimates for pre- and post-development scenarios. Built using the the open source EPA SWMM5 model, the TTT provides a user-friendly interface for novice modellers and is cross-compatible with SWMM5 for advanced model development.  
Recently, Lake Simcoe Region Conservation Authority (LSRCA), Credit Valley Conservation (CVC) and Toronto and Region Conservation Authority (TRCA) developed the [http://www.sustainabletechnologies.ca/wp/low-impact-development-treatment-train-tool/|Low Impact Development Treatment Train Tool to help developers, consultants, municipalities and landowners understand and implement sustainable stormwater management planning and design practices. The tool's purpose is to analyze annual and event-based runoff volumes and pollutant load removal by the use of LID best management practices. It provides preliminary water budget analysis, (i.e. surface ET, surface runoff, infiltration-to-soil and pollutant-load-removal estimates for pre- and post-development scenarios. Built using the the open source EPA SWMM5 model, the TTT provides a user-friendly interface for novice modellers and is cross-compatible with SWMM5 for advanced model development.


==Assess effectiveness==
==Assess effectiveness==


After selecting a suite of BMPs and running the models, make a comparison between the modelling results results and the environmental design criteria. Employ nn iterative approach, which involves adjusting the size or adding/deleting BMPs until the environmental design criteria are met. The [http://www.sustainabletechnologies.ca/wp/low-impact-development-treatment-train-tool/ LID Treatment Train Tool] can help with adjusting the size of the features to meet design criteria. Once met, the project can proceed to the detailed design stage.
After selecting a suite of BMPs and running the models, make a comparison between the modelling results results and the environmental design criteria. Employ nn iterative approach, which involves adjusting the size or adding/deleting BMPs until the environmental design criteria are met. The [http://www.sustainabletechnologies.ca/wp/low-impact-development-treatment-train-tool/ LID Treatment Train Tool] can help with adjusting the size of the features to meet design criteria. Once met, the project can proceed to the detailed design stage.
722

edits

Navigation menu