Difference between revisions of "Soluble salts"

From LID SWM Planning and Design Guide
Jump to navigation Jump to search
m
m
 
(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
[[File:Conductivity meter.JPG|thumb|Conductivity meter]]
__NOTOC__
__NOTOC__
All soils, [[filter media]], and [[green roof media]] contain some water soluble salts which include essential nutrients for plant growth. When the concentration of water soluble salts exceeds a certain level, harmful effects on plant growth occur. A soil containing a high concentration of soluble salts is referred to as a saline soil. Salt-affected soils often result from the flow of salty water onto an area, either laterally (e.g., intentional [[infiltration]] of [[winter#salt|deicing salt]] laden runoff in LID BMPs; de-icing salt laden runoff splashed onto roadside soils) or by artesian flow of salty groundwater onto [[topsoil]].
All soils, [[filter media]], and [[green roof media]] contain some water soluble salts which include essential nutrients for plant growth. When the concentration of water soluble salts exceeds a certain level, harmful effects on plant growth occur. A soil containing a high concentration of soluble salts is referred to as a saline soil. Salt-affected soils often result from the flow of salty water onto an area, either laterally (e.g., intentional [[infiltration]] of [[winter#salt|deicing salt]] laden runoff in LID BMPs; de-icing salt laden runoff splashed onto roadside soils) or by artesian flow of salty groundwater onto [[topsoil]].


The soluble salts design specification for the soil component of LID BMPs is intended to ensure its fertility and suitability for maintaining healthy vegetation cover. Where concentration of soluble salts deviates from design specification, vegetation cover may be spotty or uneven, growth may be stunted, or in extreme cases, plantings may not survive and vegetation cover becomes dominated by weeds. To ensure the soil will support the growth of plantings, which contributes to the drainage and
The soluble salts design specification for the soil component of LID BMPs is intended to ensure its fertility and suitability for maintaining healthy vegetation cover. Where concentration of soluble salts deviates from design specification, vegetation cover may be spotty or uneven, growth may be stunted, or in extreme cases, plantings may not survive and vegetation cover becomes dominated by weeds. To ensure the soil will support the growth of plantings, which contributes to the drainage and
water treatment performance of the BMP and adds aesthetic value, testing of soluble salts should be done as part of construction, assumption and verification [[inspections]].
water treatment performance of the BMP and adds aesthetic value, testing of soluble salts should be done as part of construction, assumption and verification inspections.


==Testing==
==Testing==
Soluble salts concentration in soil can be assessed by measuring the ability of a soil and water mixture to conduct an electrical current, referred to as electrical conductivity (EC). The common unit for measurement of EC is milliS eimen per centimetre (mS/cm). The official international unit of measurement is Seimen per metre (S/m). One mS/cm is equal to one deciSiemen per metre (dS/m) or 0.1 Seimen per metre (S/m).
Soluble salts concentration in soil can be assessed by measuring the ability of a soil and water mixture to conduct an electrical current, referred to as electrical conductivity (EC). The common unit for measurement of EC is milli Seimen per centimetre (mS/cm). The official international unit of measurement is Seimen per metre (S/m). One mS/cm is equal to one deciSiemen per metre (dS/m) or 0.1 Seimen per metre (S/m).


There are several methods available for preparing the soil and water mixture for EC testing. The method recommended for use in testing the soil component of LID BMPs for EC is using a 2:1 distilled water to soil ratio by volume slurry mixture based on OMAFRA recommendations for evaluating the fertility of cropland (OMAFRA, 2006). Other laboratory methods for measuring EC in engineered growing media (e.g., green roof media) include the Saturated Paste (SP) method (Whitley, 2012) or Saturated Media Extract (SME) method (Warnacke, 1995).  
There are several methods available for preparing the soil and water mixture for EC testing. The method recommended for use in testing the soil component of LID BMPs for EC is using a 2:1 (v/v) water/soil slurry <ref>Ontario Ministry of Agriculture F and RA. Soil Fertility Handbook. (Reid K, ed.). OMAFRA; 2006. http://www.omafra.gov.on.ca/english/crops/pub611/pub611.pdf. Accessed October 17, 2017.</ref>. Other laboratory methods for measuring EC in filter media include the Saturated Paste (SP) method <ref>Whitney, D.A. 2012. “Soil Salinity.” In Recommended Chemical Soil Test Procedures for the North Central Region. North Central Regional Research Publication No. 221. Missouri Agricultural Experimental Station.</ref> or Saturated Media Extract (SME) method <ref name = Warnacke>Warnacke, D. 1995. “Recommended Test Procedures for Greenhouse Growth Media.” In J. Thomas Sims and A. Wolf, eds., Recommended Soil Testing Procedures for the Northeastern United States.
Northeast Regional Bulletin #493. Newark: Agricultural Experiment Station, University of Delaware</ref>.  


For green roof media, soluble salt concentration should also be measured using EC but with application of the SME method to prepare the soil and water mixture (Green Roofs for Healthy Cities, 2011). In this extraction procedure, a sample of the media is brought to saturation with deionized water containing a small amount of Pentetic acid (i.e., DTPA) to enhance extraction of micro-nutrients (Warnacke, 1995). The SME method should also be used to prepare soil water extraction solutions for
For green roof media, soluble salt concentration should also be measured using EC but with application of the SME method to prepare the soil and water mixture <ref>Green Roofs for Healthy Cities. 2011. Advanced Green Roof Maintenance: Participant’s Manual. Toronto, ON.</ref>.  
measuring concentrations of extractable phosphorus and nitrogen for green roof media (Green Roofs for Healthy Cities, 2011).
In this extraction procedure, a sample of the media is brought to saturation with deionized water containing a small amount of Pentetic acid (i.e., DTPA) to enhance extraction of micro-nutrients <ref name = Warnacke/>. The SME method should also be used to prepare soil water extraction solutions for measuring concentrations of extractable [[phosphorus]] and [[nitrogen]] for green roof media.


==Inspections==
==Inspections==
Line 19: Line 21:


===Assumption and Verification inspections===
===Assumption and Verification inspections===
If laboratory testing indicates soil soluble salts concentration is higher than the design or product specification, or acceptance criteria, corrective actions are only needed if problems with vegetation cover , condition or composition (i.e., dominance by weeds) are also detected through visual inspection. Where vegetation cover is poor, unhealthy or dominated by weeds and soluble salts are higher than the design or product specification or Acceptance Criteria, schedule investigative work to do further sampling and testing to determine the affected area and depth and decide on corrective actions. Depending on the findings, corrective action could involve flushing the soil area with fresh water or removal and replacement of an uppermost portion of the media with material that meets the design or product specification.  
If laboratory testing indicates soil soluble salts concentration is higher than the design or product specification, or acceptance criteria, corrective actions are only needed if problems with vegetation cover , condition or composition (i.e., dominance by weeds) are also detected through visual inspection. Where vegetation cover is poor, unhealthy or dominated by weeds and soluble salts are higher than the design or product specification or Acceptance Criteria, schedule investigative work to do further sampling and testing to determine the affected area and depth and decide on corrective actions. Depending on the findings, corrective action could involve flushing the soil area with fresh water or removal and replacement of an uppermost portion of the media with material that meets the design or product specification. Corrective actions to address soluble salts exceedance in green roof media should be prescribed by the designer, product vendor or media supplier.  
 
----
Corrective actions to address soluble salts exceedance in green roof media should be prescribed by the designer, product vendor or media supplier.  
 
[[Category: testing]]
[[Category: testing]]
[[category: inspections]]
[[category: inspections]]

Latest revision as of 21:58, 8 March 2018

Conductivity meter

All soils, filter media, and green roof media contain some water soluble salts which include essential nutrients for plant growth. When the concentration of water soluble salts exceeds a certain level, harmful effects on plant growth occur. A soil containing a high concentration of soluble salts is referred to as a saline soil. Salt-affected soils often result from the flow of salty water onto an area, either laterally (e.g., intentional infiltration of deicing salt laden runoff in LID BMPs; de-icing salt laden runoff splashed onto roadside soils) or by artesian flow of salty groundwater onto topsoil.

The soluble salts design specification for the soil component of LID BMPs is intended to ensure its fertility and suitability for maintaining healthy vegetation cover. Where concentration of soluble salts deviates from design specification, vegetation cover may be spotty or uneven, growth may be stunted, or in extreme cases, plantings may not survive and vegetation cover becomes dominated by weeds. To ensure the soil will support the growth of plantings, which contributes to the drainage and water treatment performance of the BMP and adds aesthetic value, testing of soluble salts should be done as part of construction, assumption and verification inspections.

Testing[edit]

Soluble salts concentration in soil can be assessed by measuring the ability of a soil and water mixture to conduct an electrical current, referred to as electrical conductivity (EC). The common unit for measurement of EC is milli Seimen per centimetre (mS/cm). The official international unit of measurement is Seimen per metre (S/m). One mS/cm is equal to one deciSiemen per metre (dS/m) or 0.1 Seimen per metre (S/m).

There are several methods available for preparing the soil and water mixture for EC testing. The method recommended for use in testing the soil component of LID BMPs for EC is using a 2:1 (v/v) water/soil slurry [1]. Other laboratory methods for measuring EC in filter media include the Saturated Paste (SP) method [2] or Saturated Media Extract (SME) method [3].

For green roof media, soluble salt concentration should also be measured using EC but with application of the SME method to prepare the soil and water mixture [4]. In this extraction procedure, a sample of the media is brought to saturation with deionized water containing a small amount of Pentetic acid (i.e., DTPA) to enhance extraction of micro-nutrients [3]. The SME method should also be used to prepare soil water extraction solutions for measuring concentrations of extractable phosphorus and nitrogen for green roof media.

Inspections[edit]

Construction inspections[edit]

If laboratory testing indicates soil soluble salts concentration is not within the design or product specification range, notify the media or topsoil supplier, issue a “do not install” order to the construction site supervisor and contact the design professionals and property owner or project manager to determine corrective actions.

Assumption and Verification inspections[edit]

If laboratory testing indicates soil soluble salts concentration is higher than the design or product specification, or acceptance criteria, corrective actions are only needed if problems with vegetation cover , condition or composition (i.e., dominance by weeds) are also detected through visual inspection. Where vegetation cover is poor, unhealthy or dominated by weeds and soluble salts are higher than the design or product specification or Acceptance Criteria, schedule investigative work to do further sampling and testing to determine the affected area and depth and decide on corrective actions. Depending on the findings, corrective action could involve flushing the soil area with fresh water or removal and replacement of an uppermost portion of the media with material that meets the design or product specification. Corrective actions to address soluble salts exceedance in green roof media should be prescribed by the designer, product vendor or media supplier.


  1. Ontario Ministry of Agriculture F and RA. Soil Fertility Handbook. (Reid K, ed.). OMAFRA; 2006. http://www.omafra.gov.on.ca/english/crops/pub611/pub611.pdf. Accessed October 17, 2017.
  2. Whitney, D.A. 2012. “Soil Salinity.” In Recommended Chemical Soil Test Procedures for the North Central Region. North Central Regional Research Publication No. 221. Missouri Agricultural Experimental Station.
  3. 3.0 3.1 Warnacke, D. 1995. “Recommended Test Procedures for Greenhouse Growth Media.” In J. Thomas Sims and A. Wolf, eds., Recommended Soil Testing Procedures for the Northeastern United States. Northeast Regional Bulletin #493. Newark: Agricultural Experiment Station, University of Delaware
  4. Green Roofs for Healthy Cities. 2011. Advanced Green Roof Maintenance: Participant’s Manual. Toronto, ON.