Difference between revisions of "Swales: TTT"

From LID SWM Planning and Design Guide
Jump to navigation Jump to search
(Created page with "{| class="wikitable" |- |Name||User-assigned swale name |- |Upstream Node||Name of node on the inlet end of the swale (which is normally the end at higher elevation) |- |Downs...")
 
Line 25: Line 25:
|Seepage (mm/hour)||Rate of seepage loss into the surrounding soil
|Seepage (mm/hour)||Rate of seepage loss into the surrounding soil
|}
|}
[[Category: modeling]]

Revision as of 01:12, 6 September 2017

Name User-assigned swale name
Upstream Node Name of node on the inlet end of the swale (which is normally the end at higher elevation)
Downstream Node Name of node on the outlet end of the swale (which is normally the end at lower elevation)
Length (m) Length of the swale
Manning's Roughness Manning's roughness coefficient
Upstream Invert Offset (m) Depth of swale invert above node invert at inlet end of the swale
Downstream Invert Offset (m) Depth or elevation of the swale invert above the node invert at the outlet end of the swale
Depth (m) Depth of the swale
Bottom Width (m) Bottom width of the trapezoidal swale (i.e., open channel)
For a triangular channel, enter 0
Left Side Slope (m/m) Left side slope (run/rise)
Right Side Slope (m/m) Right side slope (run/rise)
Seepage (mm/hour) Rate of seepage loss into the surrounding soil