Changes

*Step 2: Select an underdrain pipe diameter (typically 100 - 200 mm), assign this as an 'embedding' depth. *Note that this component does not apply if a downstream riser is being used.   

*Step 2: Select an underdrain pipe diameter (typically 100 - 200 mm), assign this as an 'embedding' depth. *Note that this component does not apply if a downstream riser is being used.   

*Step 3: Calculate the maximum possible storage reservoir depth beneath the pipe (''d_{s, max}''):

*Step 3: Calculate the maximum possible storage reservoir depth beneath the pipe (''d_{s, max}''):

<math>d_{s, max}=\frac{f'\times '}{0.4}</math>

<math>d_{s, max}=\frac{f'\times t}{0.4}</math>

{{Plainlist|1=Where:

{{Plainlist|1=Where:

*''f''' = Design infiltration rate (mm/hr), and

*''f''' = Design infiltration rate (mm/hr), and