Line 291: |
Line 291: |
| !style="width: 550px"|<span style="color:red">('''Fail''')</span> Photo Example | | !style="width: 550px"|<span style="color:red">('''Fail''')</span> Photo Example |
| |- | | |- |
| |'''[[Enhanced Swales|Contributing Drainage Area (CDA)]]''' | | |'''[[Enhanced swales: Specifications|Contributing Drainage Area (CDA)]]''' |
| | | | | |
| Area(s) from which runoff directed to the BMP originates; includes both impervious and pervious areas. | | Area(s) from which runoff directed to the BMP originates; includes both impervious and pervious areas. |
Line 317: |
Line 317: |
| *Measure sediment depth or volume during each cleaning or annually to estimate accumulation rate and optimize frequency of maintenance; | | *Measure sediment depth or volume during each cleaning or annually to estimate accumulation rate and optimize frequency of maintenance; |
| *Remove woody [[vegetation]] from filter bed at [[inlets]] annually. | | *Remove woody [[vegetation]] from filter bed at [[inlets]] annually. |
| |[[File:Inlets bio pass.PNG|285px|thumb|center|There is no evidence of damage or displacement of the inlet structure that would prevent runoff from freely entering the BMP.]] | | |[[File:Inlet Obstruction Pass swale.PNG|300px|thumb|center|There are no obstructions at the inlet and stormwater can freely flow into the BMP.]] |
| |[[File:Inlets bio fail.PNG|300px|thumb|center|Accumulated sediment and vegetation is preventing stormwater from entering the BMP. Sediment on the pavement surface in front of the inlet indicates ponding is also occurring]] | | [[File:Overflow Outlet Pass swale.PNG|thumb|center|300px|The overflow outlet elevation and maximum surface ponding area closely match what was specified in the final design.]] |
| | |[[File:Inlet Obstruction Fail swale.PNG|255px|thumb|center|Accumulated sediment and vegetation is preventing stormwater from entering the BMP. Sediment on the pavement surface in front of the inlet indicates ponding is occurring.]] |
| | [[File:Overflow Outlet Fail swale.PNG|255px|thumb|center|The elevation of the overflow outlet is higher than what was specified in the design, producing a much larger surface ponding area than intended which could produce standing water for prolonged periods and cause vegetation to die off.]] |
| |- | | |- |
| |'''Perimeter''' | | |'''Perimeter''' |