Changes

'''Construction Steps:'''

'''Construction Steps:'''

*Installation of pre-treatment features will vary based upon type. Similarly, installation timeline will range with type and could occur at excavation and mass grading, curb work or at finishing grade. Given pre-treatment features are typically integrated with the LID inlet coordination amongst multiple sub-contractors is sometime needed. The following details steps for various pre-treatment types:

*Installation of pre-treatment features will vary based upon type. Similarly, installation timeline will range with type and could occur at excavation and mass grading, curb work or at finishing grade. Given pre-treatment features are typically integrated with the LID inlet coordination amongst multiple sub-contractors is sometime needed. The following details steps for various pre-treatment types:

*Vegetation: Follow the guidance shown below in the section “Plant Material Verification and Installation”

*[[Vegetation]]: Follow the guidance shown below in the section “Plant Material Verification and Installation”

*Curbing: Follow the guidance shown above in the section “Curbing”.

*[[curb cuts|Curbing]]: Follow the guidance shown above in the section “Curbing”.

*Aggregate: Follow the guidance shown above in the section “Stone reservoir”.

*[[Aggregates|Aggregate]]: Follow the guidance shown above in the section “Stone reservoir”.

<gallery mode="packed" widths=300px heights=300px>

<gallery mode="packed" widths=300px heights=300px>

IMG_0891.JPG|Aggregate material (rock) installed as the inlet and pre-treatment device in the rain garden at Glendale P.S. in Brampton, ON. The runoff comes from a vegetated swale into the inlet, conveying it into the rain garden. (Photo Source: CVC, 2021)

IMG_0891.JPG|Aggregate material (rock) installed as the inlet and pre-treatment device in the rain garden at Glendale P.S. in Brampton, ON. The runoff comes from a vegetated swale into the inlet, conveying it into the rain garden. (Photo Source: CVC, 2021)