Changes

Alton-chamber.JPG | Chamber resting on top of scour fabric at Alton Main Street.

Alton-chamber.JPG | Chamber resting on top of scour fabric at Alton Main Street.

20170605_164302.jpg | Components of an infiltration chamber being overlapped.

20170605_164302.jpg | Components of an infiltration chamber being overlapped.

East_Gwillimbury.png | Example of "crate style" Infiltration chambers being installed in East Gwillimbury. Photo credit: Make-Way Environmental Technologies Inc.

East_Gwillimbury.png | Example of "crate style" Infiltration chambers being installed in East Gwillimbury. Photo credit: [https://www.makeway.ca/products/stormwater-management-systems/ Make-Way Environmental Technologies Inc.]

ADS-manifold.jpg | Manifold connecting to infiltration chamber rows. Photo provided by Advanced Drainage Systems.

ADS-manifold.jpg | Manifold connecting to infiltration chamber rows. [https://www.adspipe.com/water-management-solutions/detention-infiltration Photo provided by Advanced Drainage Systems].

Scour-fabric.jpg | Scour fabric rolled out below an infiltration chamber during assembly. Photo provided by Advanced Drainage Systems.

Scour-fabric.jpg | Scour fabric rolled out below an infiltration chamber during assembly. Photo provided by [https://assets.ads-pipe.com/m/770e887b972da86f/original/SC-160LP-SC-310-SC-740-DC-780-StormTech-Design-Manual.pdf Advanced Drainage Systems].

Alton-Envirohood.jpg | A storm chamber inlet protected from debride by an envirohood. It is essential that the top of the chamber is lower in elevation than any other outlets from the catchbasin. This is because the chamber’s capacity should be fully utilized before runoff is allowed to travel farther downstream.

Alton-Envirohood.jpg | A storm chamber inlet protected from debride by an envirohood. It is essential that the top of the chamber is lower in elevation than any other outlets from the catchbasin. This is because the chamber’s capacity should be fully utilized before runoff is allowed to travel farther downstream.