426
edits
Changes
Jump to navigation
Jump to search
Line 33:
Line 33:
Trench, chamber, and perforated pipe: Installation (view source)
Revision as of 15:35, 30 September 2022
, 2 years agono edit summary
<gallery mode="packed" widths=300px heights=300px>
<gallery mode="packed" widths=300px heights=300px>
Alton-chamber.JPG | Chamber resting on top of scour fabric at Alton Main Street.
Alton-chamber.JPG | Chamber resting on top of scour fabric at Alton Main Street (Photo Source: CVC, 2019).
20170605_164302.jpg | Components of an infiltration chamber being overlapped.
20170605_164302.jpg | Components of an infiltration chamber being overlapped (CVC, n.d.).
East_Gwillimbury.png | Example of "crate style" Infiltration chambers being installed in East Gwillimbury. Photo credit: [https://www.makeway.ca/products/stormwater-management-systems/ Make-Way Environmental Technologies Inc.]
East_Gwillimbury.png | Example of "crate style" Infiltration chambers being installed in East Gwillimbury. Photo credit: [https://www.makeway.ca/products/stormwater-management-systems/ Make-Way Environmental Technologies Inc.]
Parking-lot-infiltration-chamber.JPG | Example of an infiltration chamber system under a parking lot.]
Parking-lot-infiltration-chamber.JPG | Example of an infiltration chamber system under a parking lot. (Photo Source: CVC, n.d.)
North Dakota State U infiltration trench.jpg | Infiltration trench equipped with a perforated pipe.]
North Dakota State U infiltration trench.jpg | Infiltration trench equipped with a perforated pipe.
ADS-manifold.jpg | Manifold connecting to infiltration chamber rows. Photo provided by [https://www.adspipe.com/water-management-solutions/detention-infiltration Advanced Drainage Systems].
ADS-manifold.jpg | Manifold connecting to infiltration chamber rows. Photo provided by [https://www.adspipe.com/water-management-solutions/detention-infiltration Advanced Drainage Systems].
Scour-fabric.jpg | Scour fabric rolled out below an infiltration chamber during assembly. Photo provided by [https://assets.ads-pipe.com/m/770e887b972da86f/original/SC-160LP-SC-310-SC-740-DC-780-StormTech-Design-Manual.pdf Advanced Drainage Systems].
Scour-fabric.jpg | Scour fabric rolled out below an infiltration chamber during assembly. Photo provided by [https://assets.ads-pipe.com/m/770e887b972da86f/original/SC-160LP-SC-310-SC-740-DC-780-StormTech-Design-Manual.pdf Advanced Drainage Systems].
Alton-Envirohood.jpg | A storm chamber inlet protected from debride by an envirohood. It is essential that the top of the chamber is lower in elevation than any other outlets from the catchbasin. This is because the chamber’s capacity should be fully utilized before runoff is allowed to travel farther downstream.
Alton-Envirohood.jpg | A storm chamber inlet protected from debride by an envirohood. It is essential that the top of the chamber is lower in elevation than any other outlets from the catchbasin. This is because the chamber’s capacity should be fully utilized before runoff is allowed to travel farther downstream (Photo Source: CVC, 2022).
</gallery>
</gallery>